Asymmetrical 3 Roller Mechanical Plate Rolling Machine 6mm 2000mm

Three Roller Asymmetrical Mechanical Plate Rolling Machine With Cone And Section Bending Device 3 Roller

The useful length of w11f plate rolling machine is from 1000mm to 2500mm.The range of valid thickness is from 2 to 6mm.

This machine has characteristics of user-friendly design and convenient operation which is always equipped with asymmetrical

solid rolls and easy initial pinch.It’s very suitable for thinner plate.

• The machine adopts 3-roller asymmetrical structure with the upper roller as the main drive and the lower roller making vertical movement so as to clamp the plate materials tight. The machine drive comes from the engagement between the gear of the lower roller and the gear of the upper roller.

• The machine is the most precise 3-roll machine in its category. The RGS design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.

• The Ultra wide roll support with lubrication circuit is mounted within linear slides to prevent wear and tear.

• The very high rotation power is a guarantee of the Machine superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by Gear and gearboxes directly coupled to the rolls shafts.

Major parts of Bending Machine manufacturing process

1.Working rollers: cast steel ingot (chemical composition analysis): check performance—forging roughcast — forging annealing-UT flaw — roughing (mechanical tests)-heat treatment (hardening and tempering) — UT flaw — semi finishing — finishing — MT

2.Large forgings: cylinder body, gear, gear shaft forging roughcast — surface inspection – roughing — UT flaw — UT flaw detector heat treatment — finishing semi—finishing — MT

3.Welding structure: racks, chassis, wheel box Plate into the factory (chemical composition analysis,mechanical properties test) — pretreatment — for sheet metal cutting-welding-seam UT or RT flaw — annealing treatment — roughing-finishing— vibration destressing—hot blasting —finishing

Feature:

Products details

1 ROLLER   The top and bottom roller are all main drive roller. The bottom roller lifting up and down by hand wheel The lateral roller title up and down by electro-motor
	2.Release device Manual drop end Turn the upper roller to certain angle,the rolled metal cylinder can be dropped out from the side of the upper rollers
3.Main motor The self-braking motor allows the plate to be moved very slightly,which is useful during initial forming Rotations is by means of a self-braking motor,a reduction gear and a pinion-crown system with chain
	4 Control Panel Separate control panel Digital displate for lateral rolls

Parameters