5.5KW Hydraulic Notching V Cut Machine 6000mm For The Elevator Electrical Lift

CNC V Groover Machine to V Groove a slot for the elevator and electrical lift

Main Features

1. CNC metal grooving machine is compact in structure, reliable in performance, easy operation, no deformation forever.

2. The structure consists of three sets of servo motor drive system, pneumatic clamping system and main steel frame.

3. The structure of the vertical CNC V Grooving Machine is similar to that of the door frame type. The fixture is used to pull the plate to the corresponding processing position. After the clamp is pressed, the V groove is processed by the cutter movement. It can be understood that through the movement of the plate to cooperate with the tool processing, the tool only performs the linear movement of the processing.

Process characteristics

1. high strength bolt connection;

2. the stress is eliminated by large tempering furnace;

3. the adjustable active worktable is made of carbon tool steel, after quenching, the hardness is greater than HRC55;

4. Integrated welding with steel plate;

Advantages

● High precision

● Easy operation, stable performance, and reliability

● After using the fixture of the knife, knife change needs not reset to zero.

●CNC open controller, supporting full-automatic operation, 4-blades can run simultaneously significantly improves the grooving efficiency.

Advantages

1.We are a factory, not a trading company.

2.Our machine is easy to operate, convenient and fast.

3.The machine has high safety performance and long service life.

4.Our machines are cost-effective.

Technical Data

Single Tool holder	Back gauge
Front bracket	Double tool holder
Presser foot	CNC Control System

1. The CNC system is easy to master, operate and safe. The manufacturer also provides free system upgrades

2. Vertical V-grooving machine is an upgraded product of traditional V-grooving machine, with more stable performance, and two knife holders can be customized.

3. When the machine is working, the beam is fixed, and the workpieces are transported in sequence by the back feed mechanism. The working surface is made of carbon steel. After quenching, the high-frequency surface hardness reaches 55 to 60 HRC (ordinary tabletop <30 HRC), making the table harder than stainless steel, keeping the surface flatness of the table ≤ ± 0.03mm, to avoid low hardness Scratches.

4. The machine is made of welded steel plates, with high strength, stable operation and low noise.