1. the fiber laser core diameter:50um
2. Wire length :10M
3.The stable output power:+-1.5%
5.Half angle diverges:0.06 microradian
Choose correct protection gas.
1.use argon gas,the fluent:15-25L/min,use flowmeter.
How to find the focus
1.use aluminum alloy bead welding(power adjust less than 1000w),adjust the height until sparks to MAX.
How to set the swing parameter:
1.choose frequency 100-300HZ,swing filed1.0-1.5 mm(a little bigger than the wire diameter)
V1 is the welding speed,V2 is the swing speed
normally V1=20mm/s ;d=1.0mm
How to set the parameter of wire
feeding wire speed1.0m/min
V w is the wire V.
Vg is the gap of interval
K is formal parameter(1.1-1.7)
V1 is feeding wire speed
Vw is welding speed
H is thickness of plate
d is the diameter of wire
W is the width of interval
The core diameter is smaller ,the welding depth is big
Contact Person: sales