Cold Forging Hydraulic Press Machines 5000ton Nonstick Pan Frying Pan 1250x1250mm 80Mpa

5000Ton NONSTICK PAN FRYING PAN COLD FORGING HYDRAULIC PRESS

5000T cold forging hydraulic press, mainly be used for induction bottom pot, non-stick pot. Under pressure, press two metals together. The double-bottomed pot contacts the heat source layer and transfers heat quickly, which can make the heat and temperature distribution uniform. The layer inside the pot is smooth, wear-resistant, not easy to rust, and will not produce compounds harmful to human health.

Application:

Key Features:

Data Sheet

Structural Components

1. The hydraulic press machine has built-up type frame structure and is comprised of a main machine and a control mechanism. The equipment consists of a whole frame, electrical system, hydraulic system.

2. The control mechanism is comprised of a hydraulic system, an electrical control system, a stroke limiting device, pipelines, an electrical control box and other auxiliary parts. The electrical system and the hydraulic station are connected into one via oil pipes and lead wires to realize the procedure of whole actions.

3. The main body of the slide is #45 steel whole plate. The bottom plate of the slide is a whole steel plate ensuring sufficient rigidity and strength. The guidance of the slide is sideling wedge style with foursquare and eight friction faces guide rail, which gives high precision and rigidity. After adjustment, no precision difference occurs, precision is well kept and the load-deflection resistance capacity is strong, ensuring slide operation precision, that the slide can withstand a large eccentric load and that the slide operates smoothly without chatter. The guide rail beside slide is made by copper-base alloy, adopt bow-shape oil slot structure to make sure guide rail oil no leaking, increase anti-wearing ability of the slide. On the guide rail there are special deisgned oil filling holes for auto oil-filling, beneath there are oil recieve box to avoid oil stain the floor.

Hydraulic Control System

1. The hydraulic control system is mainly placed side of equipment, where been designed maintainess platform, has tidy appearance and is easy to maintain. The hydraulic system is comprised of an oil tank, a hydraulic main control system, a pump station, a pressure gauge, a strainer and other accessories. They are connected into a whole hydraulic control system mainly via pipelines.

2. The hydraulic system is mainly characterized by proportional and servo close-loop control, dual support protection control, etc.

3. Oil tank been set forced cooling filtering system(industrial plate-type water cooling device, cooling by circulating water, oil temperature≤55℃,make sure machine can steadily pressing in 24 hours.) to ensure oil temperature been controlled in allowed range. Oil temperature warning type: oil up to 40℃, temperature alert appears on touchscreen, forced cooling system automatic working. Oil up to 55℃, motor shut down, operation stop, temperature alert appears on touchscreen.

4. The pressure of slide is regulated by using a proportional pressure valve and a manual remotely regulated pressure valve; 2 mode can be switch freely. (An acceleration and deceleration device for servo control pressure and flow fluctuation is installed in the system, which can better improve pressure control stability.) The pressure at the proportional regulation mode is set and displayed directly on the touch screen. The pressure display precision is 0.1Mpa, and the pressure control precision is less than ±0.3Mpa.