Euro Pro 175T3300 Servo CNC Press Brake 3300mm x 175Ton 9 Axis Delem DA66T Controller

configuration:

1.1. CNC system: Holland DA66T control 8+1 axes(Y1,Y2,X1,X2,Z1,Z2,R1,R2+V)

1.2. Hydraulic system:original Hoerbiger or Rexroth Germany.

1.3 Grating ruler:GIVI,Italy

1.4 Motor:Siemens, Germany.

1.5 Pump:SUNNY, USA

1.6 Electrical element:Schneider.

1.7 Servo motor and driver:DELTA,TAIWAN or Mitsubishi, Japan

1.8 Toolings:upper tools fast clamping and with compensate, lower tool with multi V or single .Segmented tools according to your requirement.

1.9 Seal ring: NOK,Japan.

1.10 Front support with table, it can move right and left.

1.11 Lower-table mechanical crowning or cylinder crowning mechanism by controlled CNC.

1.12. With safety side doors and back doors.

1.13. Hydraulic system with security valve, with spool position and manometer

1.14 With All Security equipment monitored.

Machine features

◇ Machine adopt wholly welding structure, the main parts annealing treatment, releasing internal stress.

◇ The frame and ram are processed at one time completely by heavy duty boring and milling machine.

◇ Big daylight, high ram speed

◇ Ram with fast clamping for up tooling, hydraulic crowning device on working table

◇ Advanced wholly back gauge, X axis, R axis, Z1 and Z2 with high speed, high precision.

◇ Standard configuration DA52S from Holland.

◇ Hydraulic system adopts Germany electric- hydraulic proportional system.

Optional

◇ CNC controlling front supporter

◇ Multi-axises control, Max. 16 axises

◇ Laser safe protection

◇ Bending angle automatic detection

◇ Hydraulic clamp for upper tool

◇ Mechanical crowning on working table

◇ Special tools

CNC axis function

◇ Y(Y1,Y2)axis: ram synchronous control axis, controlling bending depth and angle control.

◇ X(X1,X2)axis: Control for back gauge front-back stroke, using controlling bending flange size

◇ R(R1,R2)axis: Control for back gauge beam up-down

◇ Z(Z1,Z2)axis: Controlled back gauge finger left-right movement.

◇ V axis: Working table auto-mechanical crowning control

1.Siemens energy efficient “Stand-By” inverter motor.

2.precise and accurate 4 ~ 8 axis CNC press brakes.

3.STEELMASTER - DURMAPRESS machine frames consist of a monolithic structure with hot rolled high quality steel.

4.CNC 9 Controlled Axis (Y1,Y2,X1,X2,Z1,Z2,R1,R2 & Crowning) as standard.

5.full electronic Synchronisation with proportional valve technology. Guaranteed beam positioning of +/- 0.01mm (Y1 and Y2 Axis)

6.German Hoerbiger hydraulic system

7.cylinders made from high quality forged steel, precision honed

8.accurate positioning and repeat ability of synchronised cnc press brakes, achieved by synchronising the hydraulic cylinders with advanced CNC control of proportional valves and use of optic linear scales

9.CNC controlled back gauge with ball screw spindles, ball guides and AC or DC servo motors

10.Euro quick action tool holders.

11.linear guided sliding front sheet supports.

12.ergonomic swing-away control panel

13.side and rear safety guards with safety interlocks